Actions to Improve the Detection of Counterfeit and Fraudulently Marketed Products (Generic Letter 89-02)
March 21, 1989
TO: ALL HOLDERS OF OPERATING LICENSES AND CONSTRUCTION PERMITS FOR
NUCLEAR POWER REACTORS
SUBJECT: ACTIONS TO IMPROVE THE DETECTION OF COUNTERFEIT AND FRAUDULENTLY
MARKETED PRODUCTS (GENERIC LETTER 89-02)
Recent instances of counterfeit and fraudulently marketed vendor products have
heightened the NRC's concerns for licensees' capability to assure the quality
of procured products and to reduce the likelihood of the use of counterfeit or
fraudulent products in nuclear power plants. During recent NRC inspections of
licensees and vendors, the NRC has observed a wide variety of practices and
programs for procurement, receipt inspection, testing and dedication of equip-
ment and material for safety-related applications. The purpose of this
generic letter is to share with all licensees some of the elements of programs
that appear to be effective in providing the capability to detect counterfeit
or fraudulently marketed products and in assuring the quality of vendor
products. The staff is aware of and encourages the industry working group
efforts to develop guidance in these areas.
Three characteristics of effective procurement and dedication programs have
been identified during these NRC inspections. These characteristics are (1)
the involvement of engineering staff in the procurement and product acceptance
pro-cess (2) effective source inspection, receipt inspection, and testing
programs, and (3) thorough, engineering based, programs for review, testing,
and dedica-tion of commercial-grade products for suitability for use in
safety-related applications. NRC has found that programs that embodied the
above three ele-ments were generally effective in providing enhanced capability
to detect counterfeit or fraudulently marketed products and in assuring the
quality of procured products, both in safety-related and other plant systems.
Licensees may want to consider the applicability of these characteristics to
their programs to reduce the likelihood of the introduction of counterfeit or
fraudulent products into their plants and to assure the quality of procured
vendor products.
It should be noted that the NRC staff conditionally endorses the guidelines
contained in EPRI NP-5652, "Guideline for the Utilization of Commercial-Grade
Items in Nuclear Safety-Related Applications (NCIG-07)," that was issued by
EPRI in June 1988 for evaluating commercial-grade products for suitability for
use in safety-related applications.
Background:
Numerous instances have been identified by the NRC during the past 2 years in
which the nuclear industry received, accepted, and installed items of hardware
8903160296
.Multiple Addressees - 2 -
that were not of the quality purported by the manufacturer or supplier due to
apparent misrepresentation. Significant deficiencies have also been
identified in the programs for dedicating commercial-grade products for use in
safety-related applications.
The use in nuclear facilities of products which are counterfeit or
fraudulently marketed increases the likelihood that some plant equipment may
not perform as expected. (See the enclosed list of NRC Information Notices
and Bulletins regarding this matter.)
Discussion:
Procurement quality assurance (QA) controls for products to be used in safety-
related applications are established in Appendix B to 10 CFR Part 50, and in
Regulatory Guides 1.28, 1.33, and 1.123. It is recognized that Appendix B pro-
vides criteria for QA programs and does not specifically address fraudulent
activities; however, an effectively implemented licensee QA program would
increase the likelihood of detecting fraudulently marketed vendor products.
Although a properly implemented QA program may more readily detect substandard
products than will the commercial-grade component upgrade process, a
licensee's commercial-grade dedication process, as described in paragraph C.,
will greatly enhance the effectiveness of current upgrade practices. The
actions described in paragraphs A. and B. have also proved useful in detecting
substandard, counterfeit or fraudulently marketed products intended for use in
systems needed for the safe operation of the facility.
A. Engineering Involvement in the Procurement Process
Appropriate engineering involvement is warranted during the procurement
and product acceptance processes, including testing, for products used in
nuclear power plants. Inadequate engineering involvement has been a
common weakness in licensees' procurement programs, particularly when com-
mercial-grade procurements were involved. Involvement of a licensee's
engineering staff in an effective procurement process would normally
include (1) development of specifications to be used for the procurement
of products to be used in the plant, (2) determination of the critical
characteristics of the selected products that are to be verified during
product acceptance, (3) determination of specific testing requirements
applicable to the selected products, and (4) evaluation of test results.
The extent of necessary engineering involvement is dependent on the
nature and use of the products involved.
B. Product Acceptance Programs
Experience indicates that reliance on part number verification and certi-
fication documentation is insufficient to ensure the quality of procured
products. Licensees with effective product acceptance programs have
included receipt/source inspection and appropriate testing criteria,
effective vendor audits, special tests and inspections and post-installa-
tion tests in their programs. These licensees have applied the
inspection
.Multiple Addressees - 3 -
and testing criteria to products procured for use in safety-related
systems and for all commercial-grade products being evaluated for
suitability for use in safety-related systems. The inspection and
testing criteria also have required identification and verification of
the products' critical characteristics. In selecting the critical
characteristics to be verified, consideration may be given to the safety
significance, complexity, and application of the various products. For
suppliers with acceptable QA pro-grams, as confirmed by licensee audits,
sampling plans are often utilized to perform the required inspections and
tests. In addition to these receipt/source inspections and tests,
effective licensee programs normally verify the traceability to the
original manufacturers of procured materials, equipment, and components
in those cases where original manufacturer's certifications are elements
of the safety-related pro-curement or commercial-grade dedication program.
Effective audits have included consideration of audit approach, depth of
audit, and audit team composition and have included appropriate
engineering/technical represen-tatives. Comprehensive multi-licensee
audit teams have also been found to be effective.
C. Dedication Programs
It is each licensee's responsibility to provide reasonable assurance that
nonconforming products are not introduced into their plants. Dedication
programs that ensure the adequacy of critical parameters of products used
in safety-related applications can also contribute to the identification
of counterfeit or fraudulently marketed vendor products.
The NRC staff believes that licensees who use methods similar to those
described in EPRI NP-5652 "Guideline for the Utilization of Commercial-
Grade Items in Nuclear Safety-Related Applications (NCIG-07)," to verify
the critical characteristics of commercial-grade items intended for
safety--related applications have the basis for effective dedication
programs.
Properly implemented, the EPRI guidelines, as modified below, establish
methods which satisfy existing requirements of Appendix B to 10 CFR Part
50 as they apply to the dedication process of commercial-grade items.
1. Acceptance Method 2, "Commercial-Grade Survey of Supplier,"
should not be employed as the basis for accepting items from
suppliers with undocumented commercial quality control pro-
grams or with programs that do not effectively implement their
own necessary controls. Likewise, Method 2 should not be
employed as the basis for accepting items from distributors
unless the survey includes the part manufacturer(s) and the
survey confirms adequate controls by both the distributor
a;'d the part manufacturer(s).
2. Acceptance Method 4, "Acceptable Supplier/Item Performance
Record," should not be employed alone unless:
.Multiple Addressees - 4 -
a. The established historical record is based on industry-
wide performance data that is directly applicable to the item's
critical characteristics and the intended safety-related
application; and
b. The manufacturer's measures for the control of design, process,
and !aaterial changes have been adequately imple-mented as
verified by audit (multi-licensee team audits are acceptable).
The NRC staff believes that if licensees' procurement programs effectively
implement the elements discussed in paragraphs, A., B., and C., they will
reduce the likelihood of the introduction of counterfeit or fraudulent pro-
ducts into their plants.
Although no response to this letter is required, if you have any questions
regarding this matter, please contact the technical contact listed below.
Sincerely,
Steven A. Varga
Acting Associate Director for Projects
Office of Nuclear Reactor Regulation
Enclosures:
1. List of Bulletins and Information Notices
2. List of Recently Issued Generic Letters
CONTACT:
E. William Brach, NRR
(301) 492-0961
. Enclosure 1
BULLETINS AND INFORMATION NOTICES CONCERNING NONCONFORMING
MATERIALS AND EQUIPMENT AND INSTANCES OF INADEQUATE
DEDICATION OF EQUIPMENT FOR SAFETY-RELATED APPLICATIONS
Bulletin No. Title Date
87-02* Fastener Testing to Determine Conformance 11/06/87
with Applicable Material Specifications
87-02, Supplement 1* 04/22/88
87-02, Supplement 2* 06/10/88
88-05* Nonconforming Materials Supplied by Piping 05/06/88
Supplies, Inc., at Folsum, New Jersey, and
West Jersey Manufacturing Company at
Williamstown, New Jersey
88-05, Supplement 1* 06/15/88
88-05, Supplement 2* 08/03/88
88-10* Nonconforming Molded-Case Circuit Breakers 11/22/88
Information Notice No.
87-66 Inappropriate Application of Commercial-Grade 12/31/87
Components
88-19* Questionable Certification of Class 1E 04/26/88
Components
88-35 Inadequate Licensee Performed Vendor Audits 06/03/88
88-46* Licensee Report of Defective Refurbished 07/08/88
Circuit Breakers
88-46, Supplement 1* 07/21/88
88-46, Supplement 2* 12/30/88
88-48* Licensee Report of Defective Refurbished Valves 07/12/88
88-48, Supplement 1* 08/24/88
88-97 Potentially Substandard Valve Replacement Parts 12/16/88
*These items reflect instances in which suppliers and manufacturers of safety-
related material may have intentionally eluded QA requirements to misrepresent
the quality of their products. In the instances marked by an asterisk, the
problem was brought to NRC's attention by either a licensee or a nuclear
supplier.
Page Last Reviewed/Updated Tuesday, March 09, 2021
Page Last Reviewed/Updated Tuesday, March 09, 2021